Solutions

Smart Electric Cylinder Linear Motion Solution

Built around a closed-loop stepper driver with integrated motion control — no PLC or motion controller required. 100-segment path editing, machine/workpiece dual coordinates, IO-triggered logic, host-PC programming and standalone production for precision press-fitting, feeding, multi-point handling, testing and lifting.

View Full Solution »
Electric cylinder system architecture

Solutions

Smart Electric Gripper Torque Control Solution

A new torque control mode on top of integrated motion control and closed-loop encoding: position-controlled approach for accurate jaw opening, automatic torque hold on contact — gripping force is adjustable and verifiable, with a "torque reached" signal as hard evidence. No PLC required; host-PC programming and standalone production for machine tending, sorting, fragile-part handling and assembly pressing.

View Full Solution »
Electric gripper system architecture

Solutions

Integrated Drive & Control — Generic Motion Solution

The motion controller lives inside the driver: path engine, dual coordinates, programmable IO and closed-loop control all in one unit — single-axis machines drop the PLC and motion controller entirely, the drive IS the controller. Beyond cylinders and grippers: feeding, press-fitting, dispensing, inspection, winding, lifting, valve positioning and metering — any "trigger–position–wait–signal–loop" motion fits. Program from a host PC, download to EEPROM, run standalone; multi-axis machines are scheduled over Modbus RTU.

View Full Solution »
Integrated drive and control architecture

Solutions

Constant-Length Feeding & Cutting Solution

Built on the SD6 integrated drive & control closed-loop stepper driver, feeding lengths, speeds and accel/decel times for different products are stored as multi-segment parameters: trigger to feed, stop to cut, stall alarm built in. No PLC, no programming — changeover is two key-presses on the panel, cut from hours to minutes. For film, wire, tube and profile feeding & cutting, and pulse-compatible retrofit of legacy PLC machines.

View Full Solution 禄
Constant-length feeding system architecture

More Application Cases

More Application Cases

The same "trigger → reach position → wait → output" single-axis action becomes a new solution in every industry. The following cases are also built on the SD6 integrated drive & control closed-loop stepper driver — each with complete parameter configurations, IO design and commissioning notes, ready to implement.

Precision Press-Fitting Solution

Multi-speed pressing: rapid → press → hold → retract. Depth guaranteed by a mechanical stop, force set by the current limit, result verified by stall detection. Bushing insertion, light bearing pressing, snap-fit riveting.

View Solution »

Gluing & Dispensing Solution

Closed-loop constant travel speed = uniform bead width; wait segments control valve open/close timing — full start and stop points, no blobbing. Linear gluing, interrupted dotting, metered injection; multi-path changeover by segment recall.

View Solution »

Lifting & Boosting Solution

Multi-height millimeter presets; self-locking screw + brake interlock as dual power-off anti-drop protection; hard upper/lower limit guards. Electric solution for lifting platforms, boosters and magazine lifts.

View Solution »

Solutions

Motion Control Solutions for Automation Equipment

Smart Material Handling & Conveyor Solutions

In the realm of modern logistics and warehouse automation, efficiency and reliability are non-negotiable. Our integrated motion control solutions are engineered to power the next generation of Automated Guided Vehicles (AGVs), sorting lines, and conveyor systems.

Traditional conveyor controls often rely on complex wiring between PLCs and drivers. Our All-in-One Stepper Drives revolutionize this architecture by embedding the controller directly into the drive. This eliminates the need for bulky external controllers and drastically reduces cabling, saving valuable space within tight machine frames and control cabinets.

Equipped with standard RS485 and Modbus RTU protocols, our drives enable seamless communication across multiple nodes, allowing for precise synchronization of belt speeds and sorting mechanisms. Whether it is a high-speed cross-belt sorter or a compact palletizer, our technology ensures smooth, jitter-free operation and robust performance 24/7, even in the most demanding industrial environments.


Solutions

Precision Motion Control for Medical & Life Sciences

In the medical and laboratory environment, precision and reliability are matters of life and science. Our integrated motion controllers are specifically designed to meet the rigorous demands of healthcare equipment, where silent operation and micro-level accuracy are essential.

By utilizing advanced command smoothing algorithms and high-resolution micro-stepping, our drives ensure absolutely jitter-free movement. This is critical for applications such as liquid handling in biochemistry analyzers, where vibration-free dispensing prevents sample splashing and ensures accurate dosing.

The compact, fully enclosed design minimizes the risk of dust accumulation, making it ideal for cleanroom environments. Whether powering a high-throughput gene sequencer or a fully automated immunoassay analyzer, our technology delivers the silent, precise, and dependable performance required for the most sensitive medical diagnostics.


Solutions

Intelligent Gluing & Dispensing Solutions

Precision and efficiency are the hallmarks of modern automated gluing processes. Our integrated stepper drives are purpose-built to power high-performance dispensing machines, offering a seamless blend of motion control and drive technology in a single unit.

Unlike traditional setups that require a separate PLC or motion controller, our solution features built-in path editing capabilities. This allows the drive to execute complex 3D trajectories directly, significantly reducing the system's response time and eliminating the communication delay between the controller and driver.

The result is a perfectly smooth glue trail with no overshoot or corner pausing. With support for various I/O signals and high-speed pulsing, our drives ensure precise synchronization between the XYZ axes and the dispensing valve, delivering consistent, high-quality results for everything from micro-dotting to continuous sealing.

Product Consultation